The DS350G crane system was used by a wide range of major crane manufacturers, including Liebherr, Tadano, Manitowoc, Demag, American Hoist, Caterpillar, Fassi, Sany, Sumitomo, Kobelco, Komatsu, Palfinger, Gottwald, Hitachi, Kone, NPCC, P&H, Cargotec, DG Crane, Effer, Fushun, Locatelli, Sennebogen, Sormec, XCMG, and others. The DS350G was one of the most widely deployed load moment indicator platforms of its generation, which is why replacement parts and compatible upgrade paths remain in demand today. The sections below answer the most common technical questions about the DS350G system, its history, and the options available when it reaches end of service life.
What was the DS350G system used for on cranes?
The DS350G was a load moment indicator and crane safety system designed to monitor and limit the load moment on mobile and crawler cranes. Its primary function was to calculate the relationship between the lifted load and the crane’s structural capacity at any given radius, and to alert or stop the crane before an overload condition occurred.
In practical terms, the DS350G processed inputs from force sensors, angle sensors, and length sensors to determine the actual load moment in real time. This data was compared against the crane’s rated capacity chart, and the system would trigger a warning or cut-out signal when the load approached or exceeded the safe working limit. This function is also commonly referred to as a rated capacity indicator (RCI) or safe load limiter, depending on the region and the standard applied.
Beyond overload protection, the DS350G typically provided the crane operator with a continuous readout of hook load, working radius, and percentage of rated capacity on a dedicated display console. On some installations, the system also managed the anti-two-block (A2B) function, which prevents the hook block from being raised into the boom tip. The combination of these functions made the DS350G a central component of crane safety on the job site.
Which crane manufacturers integrated the DS350G?
The DS350G was integrated by a broad cross-section of the global crane industry. Based on our compatibility records, the following crane brands used the DS350G system as original equipment: American Hoist, Cargotec, Caterpillar, Demag, DG Crane, Effer, Fassi, Fushun, Gottwald, Hitachi, Komatsu, Kone, Liebherr, Locatelli, Manitowoc, NPCC, P&H, Palfinger, Plimsoll, Sany, Sennebogen, Sormec, Sumitomo, and Tadano.
This list reflects how broadly the DS350G was adopted across different crane types and markets. It appeared on mobile telescopic cranes, lattice boom crawler cranes, knuckle boom cranes, and offshore lifting equipment. The system’s widespread use across so many manufacturers means that older cranes of many different makes are still operating today with DS350G hardware installed.
It is also worth noting that some manufacturers used closely related variants. Demag, Sany, Gottwald, and Faun, for example, used the DS350G/C variant alongside or instead of the standard DS350G. These variants share a common design lineage and are relevant when sourcing compatible replacement systems.
How did the DS350G differ from other load moment indicators of its era?
The DS350G stood out from other load moment indicators of its generation primarily through its modular architecture and its ability to handle complex crane configurations. While many competing systems of the same period offered basic overload protection, the DS350G was designed to support a wider range of sensor inputs and crane geometries, making it suitable for both simple mobile cranes and more demanding applications.
The system used dedicated sensor interfaces for angle, length, and force measurement, which allowed it to be configured for different boom types and rigging arrangements. This flexibility meant that a single platform could be adapted for telescopic boom cranes, lattice boom cranes, and knuckle boom applications without requiring a completely different hardware architecture.
The DS350G console also provided a more detailed operator interface than many of its contemporaries. The display gave real-time feedback on multiple parameters simultaneously, which improved situational awareness for the crane operator. At a time when many systems offered only a basic percentage meter and a warning light, this level of detail was a meaningful differentiator.
The system’s durability in harsh environments was another factor that contributed to its widespread adoption. Cranes operating in construction, offshore, and industrial settings require electronics that can withstand vibration, temperature variation, and moisture. The DS350G was engineered with these conditions in mind, which is part of the reason that units installed decades ago are still found in service today.
Why did crane operators and manufacturers move away from the DS350G?
The primary reason crane operators and manufacturers moved away from the DS350G is the natural progression of electronics technology. Components used in the DS350G, including display hardware, processing units, and certain sensor interfaces, belong to a generation of electronics that is no longer in production. As these components age, sourcing replacements for repairs becomes progressively more difficult.
Regulatory and certification requirements have also evolved. Modern crane safety standards in many markets now require more detailed data logging, improved diagnostic capabilities, and in some cases remote monitoring functionality. The DS350G was not designed with these requirements in mind, and retrofitting the system to meet current expectations is generally not practical.
Software support is another consideration. Newer crane safety systems use configurable software platforms that allow technicians to update capacity charts, adjust sensor parameters, and perform diagnostics using modern tools. The DS350G relies on older configuration methods that require specialized knowledge and equipment that is increasingly rare outside of specialist service organizations.
Finally, the expectations of crane operators themselves have changed. Modern systems offer touchscreen interfaces, wireless connectivity, cloud-based data logging, and integration with fleet management software. These capabilities are now considered standard in many sectors, and the DS350G cannot be upgraded to provide them without replacing the core system.
What systems replaced the DS350G in modern cranes?
The DS350G has been succeeded by more advanced load moment indicator platforms that offer the same core safety functions alongside modern connectivity and data management capabilities. In our product range, the DS130 safe load indicator and DS430 load moment indicator are the current systems used to replace the DS350G across all the crane brands listed above.
The DS130 safe load indicator handles the sensor processing and safety logic functions that the DS350G performed, while the DS430 load moment indicator is suited to more complex crane configurations requiring advanced moment calculation. Both systems are compatible with modern 4…20 mA force sensors and current angle and length measurement technology, which is important because original DS350G sensor types are often no longer available as new parts.
A practical example of this upgrade path is a crane built in 1998 that was restored by replacing its weighing system with a DS130 controller and modern 4…20 mA force sensors, because the original force transducers were no longer available. The crane structure remained entirely in service. Only the measurement and control electronics were renewed. This approach allows the crane to continue operating safely without the cost and disruption of replacing the machine itself.
The replacement process is handled as a field service project, covering removal of the legacy system, installation of the new hardware, sensor calibration, and load testing. The crane’s rated capacity charts are programmed into the new system, so the operator experience at the console closely mirrors what was provided by the original DS350G installation.
Can the DS350G still be repaired or replaced with compatible parts?
In some cases, DS350G systems can still be repaired, particularly at the PCB and electronic board level. We have carried out console repairs on DS350G units, including a DS350 console on a Sumitomo crawler crane that was restored with a new electronic board. Whether a repair is viable depends on the specific fault, the condition of the unit, and the availability of the components involved.
However, repair is not always the most practical path forward. When the fault involves components that are no longer manufactured, or when the system has accumulated multiple failures over time, a full replacement with a current system is often the more reliable and cost-effective solution. A repaired legacy system still carries the risk of further failures from the same aging hardware, whereas a replacement system starts with a full service life ahead of it.
For crane owners and technical managers evaluating their options, the key questions are the age and overall condition of the DS350G installation, the availability of spare parts for the specific fault, and whether the current system meets the data logging and reporting requirements of the crane’s operating environment. Our heavy-duty parts inventory and global service team can assess the situation and recommend the most appropriate course of action.
An obsolete system does not mean the crane has to be scrapped. The steel structure of the crane can remain in service, and the safety and control electronics can be upgraded to current standards by the original manufacturer. If you are managing a crane with a DS350G system and need guidance on repair or replacement options, contact PAT-Krüger to discuss the right solution for your installation.
Related Articles
- What's the installation cost of an ATEX CCTV system?
- How can upgrading my crane’s legacy system improve its safety features?
- 9 Essential Features of Winch Force Indicators That Prevent Catastrophic Equipment Failure
- What types of industrial weighing systems are used in production?
- Can ATEX-rated cameras be used in offshore environments?