Which crane brands used the AS110 system?

The AS110 system was installed on cranes from several major manufacturers, including Liebherr, Tadano, Manitowoc, Sumitomo, Fassi, Faun, Effer, and American Hoist. These are the brands for which we have confirmed AS110 installations in our systems database. The AS110 was a load moment indicator and safe load indicator platform used across a wide range of mobile and crawler cranes. This article covers what the AS110 did, which brands used it, and what your options are today if you are running one.

What was the AS110 system used for on cranes?

The AS110 system is a crane safety system that functioned as a load moment indicator (LMI) and safe load indicator (SLI), also referred to in some regions as a rated capacity indicator (RCI) or rated capacity limiter (RCL). Its core purpose was to monitor the crane’s actual load against the rated capacity for a given configuration, and to alert or stop the operator before a structural limit was exceeded.

In practical terms, the AS110 collected data from sensors measuring boom angle, boom length, and line pull or hook load. It then calculated the load moment and compared it against the crane’s rated capacity chart. When the load approached or exceeded the safe working limit, the system triggered an alarm or activated a cut-out to prevent further movement in a dangerous direction.

This type of system is a regulatory requirement on most cranes operating in commercial and industrial environments. Classification societies, national safety authorities, and worksite standards all require a functioning load moment indicator or safe load limiter to be present and calibrated. The AS110 fulfilled that role on a large number of cranes built during its production period.

Beyond the basic safety function, the AS110 also provided the operator with a real-time display of hook load, rated capacity, and percentage of capacity in use, giving the operator the information needed to work safely and efficiently within the crane’s limits.

Which crane manufacturers originally installed the AS110?

Based on our installation records, the AS110 crane system was factory-fitted or field-installed on cranes from the following manufacturers: American Hoist, Effer, Fassi, Faun, Liebherr, Manitowoc, Sumitomo, and Tadano. These are the brands confirmed in our compatibility database as having carried the AS110 as an original or early-retrofit system.

It is worth noting that the same physical crane model could leave the factory with different safety systems depending on the year of manufacture, the market it was sold into, and the customer specification at the time of order. This means that not every crane from these manufacturers will have an AS110, and the presence of an AS110 does not always indicate a specific build year or variant.

The AS110 was part of PAT-Krüger’s earlier generation of crane safety platforms. As the original manufacturer of the AS series, we have detailed knowledge of how these systems were configured across different crane types, which is directly relevant when planning a retrofit or replacement.

Is the AS110 system still supported and available?

The AS110 is an older system, and availability of original components, displays, and controller boards is limited. While we maintain a spare parts inventory and can often support legacy systems, the AS110 platform belongs to an earlier generation of crane safety technology. Sourcing exact replacement parts becomes increasingly difficult as the installed base ages.

If your AS110 is still functioning and you need a specific component, it is worth contacting us directly to check availability. We hold a broad range of parts for legacy systems and have experience repairing older electronics, including PCB-level repairs. A practical example of this approach is a Sumitomo crawler crane where a DS350 console was restored with a new electronic board, keeping the crane in service without a full system replacement.

However, for crane owners planning ahead, relying on continued availability of AS110 components carries risk. A system that cannot be repaired or recalibrated is a crane that cannot legally operate. This makes understanding your retrofit options an important part of long-term fleet management.

Our field service team can assess the current condition of an AS110 installation and advise on whether repair or replacement is the more practical route for your specific situation.

What are the options when an AS110 system fails or becomes obsolete?

When an AS110 system fails or can no longer be adequately supported, the primary replacement options are the DS130 safe load indicator and the DS430 load moment indicator, both part of our current DSx30 platform. These systems are the direct successors to the AS series and are designed to replace legacy PAT systems while preserving the crane’s existing sensor infrastructure where possible.

The key principle here is that an older safety system does not mean the crane itself has to be retired. The steel structure, the hoist, the slewing ring, and the hydraulics may all have many years of service life remaining. Replacing the electronics with a current-generation system is a cost-effective way to keep the crane compliant, safe, and operational.

DS130 safe load indicator

The DS130 is suited to simpler crane configurations where a straightforward load and capacity display is the primary requirement. It is a robust, field-proven system that supports a wide range of sensor inputs and can be configured to match the crane’s rated capacity charts. For many AS110 installations on knuckle boom or smaller mobile cranes, the DS130 is the appropriate replacement.

DS430 load moment indicator

The DS430 is designed for more complex crane systems, including those with multiple boom configurations, luffing jibs, or offshore applications. It offers expanded functionality compared to the DS130 and is suited to cranes where the original AS110 was handling a more demanding monitoring task. Both systems share the same modern platform architecture and benefit from current software and hardware support.

You can find full details on both systems on our DS130 and DS430 product page.

How do you identify the correct replacement for an AS110 installation?

Identifying the correct replacement for an AS110 system depends on the crane model, the boom configuration, the sensor types currently installed, and the regulatory requirements of the operating environment. There is no single universal answer, but there is a clear process for arriving at the right solution.

The following information is typically needed to specify a replacement correctly:

  • Crane manufacturer and model — for example, Liebherr LTM or Tadano ATF series
  • Year of manufacture — this affects which sensor types and cable configurations were used
  • Boom type and configuration — telescopic, lattice, knuckle boom, or a combination
  • Existing sensor types — angle sensors, length sensors, pressure transducers, or load pins
  • Current AS110 part numbers — visible on the controller unit or in the original documentation
  • Operating environment — onshore, offshore, ATEX zone requirements

In some cases, existing sensors can be reused with the new DS130 or DS430 controller, reducing the scope of work and cost. In other cases, sensors may also need to be replaced, particularly if the original force transducers are no longer available or have drifted out of calibration. We have experience with both scenarios, including installations where modern 4 to 20 mA force sensors were fitted alongside a DS130 controller to fully restore a crane’s safety system.

Our system integration service covers the full process from technical assessment through to installation and commissioning, and our heavy-duty parts range includes the sensors, load pins, and ancillary components that may be needed as part of a complete retrofit.

If you are managing a crane with an AS110 system and want to understand your options, contact us with the crane details and we will advise on the most practical path forward. The goal is always to keep the crane working safely, not to replace equipment that does not need replacing.

Related Articles