Can offshore cranes be retrofitted with a DS130?

Yes, offshore cranes can be retrofitted with a DS130 safe load indicator. The DS130 safe load indicator, also known as a load moment indicator or rated capacity indicator depending on the region, is designed as a direct replacement for a wide range of older PAT systems currently installed on cranes from many of the world’s leading manufacturers. Retrofitting means the crane’s steel structure stays in service while only the electronics are upgraded by the original equipment manufacturer.

The sections below answer the most practical questions crane owners, technical managers, and service engineers ask before committing to a DS130 retrofit on an offshore crane.

What types of offshore cranes are compatible with the DS130?

The DS130 safe load indicator is compatible with offshore cranes from a broad range of manufacturers where older PAT systems such as the DS350G, DS100, PRS145, AS110, or similar legacy units are currently installed. Compatibility is determined by the original system fitted to the crane, not by the crane brand alone.

Crane brands for which a DS130 retrofit is available include, among others, Liebherr, Manitowoc, Tadano, Demag, Sormec, Palfinger, Cargotec, Sumitomo, Hitachi, Komatsu, NPCC, P&H, Sany, Gottwald, Kone, Locatelli, Kobelco, and ZPMC. We have completed DS130 retrofits on ZPMC ship-to-shore cranes, replacing older DS120 systems with current DS130 units, which illustrates the range of applications this platform covers.

The compatible legacy systems that the DS130 replaces include the DS350G, DS350G/C, DS350C, DS100, PRS145, AS110, PRS85, and several others depending on the specific crane brand. In some combinations, additional systems such as the M4E/2, I2 System, Maestro, AS4, PDC, ECIS, and iFlex variants are also within scope. If you are unsure which system is currently installed on your crane, the nameplate on the console or the original documentation will identify it. You can also explore the DS130 and DS430 platform to see the full scope of what the system covers.

What does a DS130 retrofit actually involve?

A DS130 retrofit involves replacing the existing crane safety computer, display console, and associated sensors with current DS130 components while leaving the crane’s mechanical and structural elements untouched. The goal is to restore full safe load indication, load moment calculation, and overload protection functionality using modern electronics.

In practice, the retrofit scope depends on the condition and age of the existing installation. In some cases, existing wiring harnesses and sensor mounting points can be reused, which reduces installation time. In other cases, particularly on cranes built several decades ago, the force transducers or angle sensors may also need to be replaced. We have carried out retrofits on cranes built as far back as 1998, upgrading the weighing system with a DS130 controller and modern 4…20 mA force sensors when the original transducers were no longer available as spare parts.

The DS130 safe load indicator is engineered to replicate the functionality of the system it replaces, so crane operators encounter a familiar working environment after the upgrade. Sensor calibration is carried out on-site following installation to ensure the system reflects the actual characteristics of the crane. Our field service team handles installation, wiring, commissioning, and calibration worldwide.

Does the DS130 meet offshore safety certification requirements?

The DS130 safe load indicator is built to meet the certification and compliance requirements relevant to offshore crane operations. As the original equipment manufacturer of the DS series, we design and supply systems that align with international standards for crane safety and load moment indication in demanding offshore environments.

Offshore crane safety systems are typically required to comply with standards covering rated capacity indication, overload protection, and in some cases ATEX certification for use in potentially explosive atmospheres. The DS130 platform addresses these requirements. For specific certification documentation applicable to your installation or flag state, visit our certifications page or contact us directly, as requirements vary by jurisdiction and classification society.

It is worth noting that running a crane with an older, unsupported safety system can itself become a compliance issue during periodic surveys or third-party audits. Upgrading to a current DS130 system resolves that exposure without requiring structural modifications to the crane.

How long does a DS130 retrofit take on an offshore crane?

The duration of a DS130 retrofit on an offshore crane depends on the installation, the condition of the existing wiring and sensors, and the accessibility of the crane. There is no single fixed timeframe that applies to every job, and we assess each project individually before committing to a schedule.

Factors that influence the timeline include whether the existing sensors can be reused, how many crane functions need to be integrated, and whether the work is carried out onshore during a scheduled maintenance window or offshore on an operating vessel. Preparation work, such as sourcing the correct sensor types and pre-configuring the DS130 controller with the crane’s load chart data, can be completed before the technician arrives on site, which reduces the time the crane is out of service.

For crane owners planning around vessel schedules or offshore campaigns, early engagement with our team allows us to align the retrofit with existing planned downtime rather than creating additional crane unavailability.

Can the DS130 integrate with existing crane control systems?

Yes, the DS130 safe load indicator is designed to integrate with existing crane control systems. As a direct replacement for earlier PAT systems, it uses compatible signal interfaces and can connect to the crane’s existing control architecture, including relay outputs for overload cut-out, audible and visual alarms, and data outputs for remote monitoring.

The DS130 platform supports standard industry signal formats including 4…20 mA sensor inputs, which is why it can be used to replace older sensor types that are no longer available. Where the existing crane control panel or operator display uses specific signal types, integration is assessed during the project scoping phase. Our system integration capability covers turnkey solutions that combine the DS130 with complementary safety and control functions where needed.

For cranes that require additional functionality beyond basic load moment indication, the DS130 can also be paired with anti-collision systems, CCTV monitoring, and remote data access, depending on the crane’s application and the owner’s operational requirements.

What are the alternatives to retrofitting a DS130 on an offshore crane?

The main alternative to a DS130 retrofit is the DS430 safe load indicator, which is the higher-specification model within the same DSx30 platform. Both units replace the same range of legacy PAT systems, and the choice between them depends on the crane’s complexity, the number of functions to be monitored, and the level of display and interface capability required.

Beyond the DS430, other options depend on the specific situation:

  • PCB-level repair: If the existing system is still structurally sound but has a failed electronic board, a board-level repair may restore function without a full system replacement. We have carried out this type of repair on Sumitomo crawler cranes, for example, replacing a faulty electronic board in a DS350 console. This is a viable path when the system is otherwise in good condition and spare parts are available.
  • Partial upgrade: In some cases, only specific components such as the display unit or the force sensors need to be replaced rather than the entire system. This depends on what is still serviceable.
  • Full decommissioning of the crane: This is rarely necessary when the crane’s mechanical structure is sound. An obsolete safety system does not mean the crane has reached the end of its useful life. The steel stays; the electronics can be renewed.

The right path depends on the specific system installed, the crane’s age, the availability of spare parts for the existing system, and the owner’s long-term operational plans. We recommend a technical assessment before deciding between repair and full replacement.

If you are managing an offshore crane with an older PAT system and are considering a DS130 crane safety upgrade or want to understand which retrofit option fits your situation, contact PAT-Krüger to discuss your specific installation. We can identify the compatible replacement system and outline what a retrofit would involve for your crane.

Related Articles